Radio Collector's Afficionado's Resource

Vantage Point Cgupm12 S Universal Projector

The Universal Projector Mount sets itself detached from other industrial looking ceiling mounts. Styled from steel and die-cast aluminum, the mounts brag a clean and simple finished aspect when looking at it on the ceiling. The CGUPM06 extends approximately 12 inches from the ceiling, rotates, tilts and swivels in nearly any direction, and is capable of functioning on flat or vaulted ceilings. The Universal Projector Mount is compatible with most of today�s LCD and DLP home theater projectors and is totally adaptable to fit a wide range of projector hole patterns.

Vantage Point Cgupm12 S Universal Projector Picture

Vantage Point Cgupm12 S Universal Projector Picture

Vantage Point Cgupm12 S Universal Projector Photo

Vantage Point Cgupm12 S Universal Projector Image

Most helpful client reviews

16 of 16 people found the following review helpful.
Very easy to install.
By Cheetokhan
Just got this to mount my new Mitsubishi DH1000U. I necessitated something that would let me mount my projector to a sloped ceiling, and this worked perfectly. Only took me when it comes to 30 minutes to attach this to the projector, mount it on the ceiling, and adjust it. Really easy to install and adjust.
This assemblage is heavier obligation than it appears in the pictures. All the joints are easy to adjust and are locked in place with pre-installed Allen head lock screws. Once the lock screws are tightened, the mount is altogether rigid.
They even include the Allen wrench in the box. All you need is a drill with a 5/32 bit for the 3 heavy responsibility screws that hold it to the ceiling joist, and a Phillips screwdriver (I used a driver bit in a cordless drill).
The way this is designed, you could use it to mount a projector to a ceiling or to a wall.

10 of 11 humans found the following review helpful.
For projectors with 3 mounting holes
By Autodidact
This is a good mount but it is designed for projectors that only need three mounting points. galore projectors need 4 mounting points (one in each corner) this will make this mount difficult to us….

7 of 7 humans found the following review helpful.
Simple and solid
By Jim Westhoff
I purchased this to hold my HD1000U and it is working great. The directions are worthless. Putting it together based on the picture on the box was regarding as good. But it was so simple you in truth don’t need the directions. It was as easy as finding a stub, drilling 3 holes and screw it in. Then mount the projector to the other end and attach the two sides. It will bend any direction you want and the extention bar is only necessitated if you want the 12 inch drop. I thought I would need it, but was capable to install it without it. It looks nice and works great.

See all 61 client reviews…