Home > ham-radio > Heavy Duty Radio Antenna Spring
13 Jun

Heavy Duty Radio Antenna Spring

Posted by Comments off

Heavy Duty Radio Antenna Spring

SS-3H Heavy obligation stainless steel springs

Heavy Duty Radio Antenna Spring

Heavy Duty Radio Antenna Spring Photo

Heavy Duty Radio Antenna Spring

Heavy Duty Radio Antenna Spring Picture

Heavy Duty Radio Antenna Spring

Heavy Duty Radio Antenna Spring Image

Heavy Duty Radio Antenna Spring

Heavy Duty Radio Antenna Spring Image


Most helpful client reviews

7 of 8 people found the following review helpful.
5No more broken antenna
By Robert Bolling
Installed this on my jeep along with a five foot FireStik, works like a charm. I have seen innumerable fiber glass antennae bite the dust on the trail from a little tree branch hit or even from wind. This little coil gives just sufficient play and wiggle to prevent this.

2 of 2 people found the following review helpful.
5I purchased a few springs and this one is the best
By Monica Israels
I have a new Jeep and I necessitated a new CB spring. I purchased both of the springs from Firestik as well as a huge spring from Radio Shack. The Radio Shack spring was too fat to fit where I necessitated it. The littler spring from Firestik seemed fine until the Jeep started rocking from side to side on a bumpy trail, and then the CB antenna would fling back and forth, ending up horizontal half of the time. This tougher spring is just perfect, as it allows a good deal of flexibleness while staying somewhat rigid on the trail.

1 of 1 humans found the following review helpful.
5works great
By christopher robert senger
i have a 7 foot firestik on it and it works just fine. the tip of my antenna is just over 11 feet and i hit awnings and trees all the times and it has a great deal of give. works outstanding on the highway as well it remains stiff sufficient that the antenna does not flop around.

See all 6 client reviews…

Categories: ham-radio
Tags:
Comments are closed.