Home
>
ham-radio > Alinco Ems 14 Radio Desk Microphone
12 Apr
Alinco Ems 14 Radio Desk Microphone
Alinco Ems 14 Radio Desk Microphone
Desk mic is a favored amidst DR-605TQ owners who are running their rigs in a base configuration / Adjustable Gooseneck / Electret condenser mic element CTCSS, DCS encode+decode, DTMF encode and Tone-burst are all standards Clean, clear Alinco audio Super-wide 7 reputation alphanumeric display Wide and narrow FM modes Theft alarm feature A large, palm-fitting commercial-grade backlit microphone with a metal connector (not a modular plug) as well as direct frequency input and direct multi-function access such as monitor, call channel, power setting, memory to VFO plus more! Stays in mode you select (voice/packet) through power off cycles Ten autodial memories Channel steps – 5, 8.33, 10, 12.5, 15, 20, 25, 30, 50 KHz Antenna Connector – BNC (50ohm unbalanced) Frequency stability – +/- 2.5ppm TCXO Supply voltage – 13.8V DC +/- 15% negative ground Temperature range – -10 – +60c (14 – 140F) Dimensions – 142(W) x 40(H) x 174(D) mm 5.59(W) x 1.57(H) x 6.85(D) Weight – Approx. 1.0Kg (35.3oz) CTCSS tone – encoder/decoder 39 tones Digital Coded Squelch – -encoder/decoder 104 codes Output power – Approx. 50W (HI) Approx. 20W (MID) Approx. 5W (LOW) Modulation system – Variable reactance frequency modulation Spurious emission – Less than -60 dB Maximum frequency deviation – +/- 5 KHz (FM) / +/- 2.5 KHz (NFM) Receive system – Double-conversion superheterodyne Sensitivity(-12dB SINAD) *2 – Less than -16.0dBu Intermediate frequency – 1st IF 21.7 MHz, 2nd IF 450 KHz Selectivity 2 – -6dB – 12KHz or more -60dB – 28KHz or less (FM) -6dB – 6KHz or more -60dB – 16KHz or less (NFM) Mobile for vehicle use
Alinco Ems 14 Radio Desk Microphone Image
Alinco Ems 14 Radio Desk Microphone Pic
Alinco Ems 14 Radio Desk Microphone Picture
Alinco Ems 14 Radio Desk Microphone Picture
|
Comments are closed.